df005l thru DF10L sintered glass passivated bridge rectifier reverse voltage - 50 to 1000 volts forward current - 1.0 ampere features mechanical data * internal constructure with gprc (glass passivated rectifier chip) inside * diffused junction * low forward voltage drop, high current capability * high surge current capability * designed for surface mount application * plastic material-ul recognition flammability classification 94v-0 case : molded plastic terminals : plated leads, solderable per mil-std-750, method 2026 polarity : as marked on case weight : 0.38 gram maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. maximum repetitive peak reverse voltage maximum average forward rectified current @ t a =40 o c peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage @ i f =1.0 a maximum dc reverse current at rated dc blocking voltage @t c =25 o c @t c =125 o c typical junction capacitance per element (note 1) typical thermal resistance, junction to ambient (note 2) operating junction and storage temperature range symbols v rrm i (av) i fsm v f i r c j r ja t j ,t stg 200 400 600 800 1000 1.0 50 1.1 5 500 25 40 -55 to +175 units volts maximum rms voltage v rms 140 280 420 560 700 volts maximum dc blocking voltage v dc 200 100 70 100 df02l df04l df06l df08l DF10L df01l df005l 50 35 50 400 600 800 1000 volts volts amps amps ua pf i 2 t rating for fusing ( t < 8.3ms ) i 2 t 10.4 a 2 s o c / w o c notes : (1) measured at 1.0 mhz and applied reverse voltage of 4.0 v dc. (2) thermal resistance from junction to ambient mounted on p.c.b. with 0.5 x 0.5" ( 13 x 13mm ) copper pads. zowie technology corporation 05/2004 *dimensions in inches and (millimeters) tm superbridge with gprc inside dfml patented .335(8.50) .307(7.80) .335(8.50) .323(8.20) .131(3.34) .102(2.60) .268(6.80) .031(0.8) .244(6.20) .024(0.6) .205(5.2) .197(5.0) .020(0.51) .020(0.50) .075(1.90) .055(1.39) .189(4.8) .165(4.2) .350(8.9) .311(7.9) .067(1.7) .051(1.3) - + ~ ~
ratings and characteristic curves df005l thru DF10L zowie technology corporation 05/2004 fig.1 - forward current derating curve fig.3 - typical instantaneous forward characteristics average forward rectified current, amperes 1.0 0.5 iinstantaneous forward current, amperes 0.10 1.00 10.00 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 25 50 75 100 125 150 175 pulse width=300us ambient temperature, o c instantaneous forward voltage, volts 60 hz resistive or inductive load fig.2 - maximum non-repetitive peak forward surge current peak forward surge current, amperes number of cycles at 60hz pulse width 8.3ms single half-sire-wave (jedec method) 0 10 20 30 40 60 50 1 10 100 fig.4 - typical reverse characteristics per bridge element percent of rated peak reverse voltage,% instantaneous reverse current, microamperes 0.01 0 0.10 1.0 10.0 100 20 40 60 80 120 140 100 fig.5 - typical junction capacitance reverse voltage, volts .1 1 junction capacitance, pf 100 .2 .4 1.0 2 4 10 20 40 100 10 t j =25 o c t j =25 o c t j =25 o c t j =100 o c
|
